Select Page

Stop Water Penetration Without Blocking The Capillaries by Using Non Slip Super Penetrative Sealer

Non-Slip solutions present to you some of the best and superior quality concrete densifier and sealers. Their water repellent properties help you get great resistance from chemicals and liquids etc. The concrete densifier and sealers are widely used especially in garages and other commercial areas where there are more footfalls. They not only add a distinct polish and gleam to a surface but also protect it from corrosion and abrasion. The concrete densifier hardens the soft surface of the concrete and increases its endurance. The quantity of the densifier depends upon the cement to water ratio of the concrete.

The concrete densifier is nothing but a water-based chemical solution that reacts with the calcium hydroxide in the concrete to produce calcium silicate hydrate (CSH). The concrete gets its strength from Calcium Silicate Hydrate as it fills the open pores of the concrete and binds seamlessly with the concrete. Our extensive range of optimum grade concrete densifier is sure to fill all the capillaries of the concrete while retaining its natural look.

Concrete Sealers are one of the best ways to increase the life of the concrete. A concrete sealer is nothing but a protective layer that prevents moisture and growth of mold. The concrete sealers are suitable for indoor as well as outdoors. The concrete sealer is the chemical barriers aiming to provide ultimate protection to the concrete. The concrete sealers help one to maintain the aesthetic appearance of the concrete intact despite regular wear and tear. Non-Slip Solutions are one of the leading suppliers of Concrete densifier and sealers across Australia. We are committed to providing advanced and durable concrete densifier and sealers to prevent your concrete from cracking, staining, scaling and much more.

Supa Seal Penetrative Sealer A Water Bourne Product That does not have any residue to buff out and does not alter the WET coeficient of Friction of the substrate.

Technical Information


Protective Impregnation

Product Description:

SUPER PENETRATIVE Impregnation is a state-of-the-art product which uses a high quality Silane technology, to produces a protective impregnation*.

This easy to apply, environmentally friendly, non-yellowing impregnation is designed for interior and exterior applications.


– Protection against oil, grease and chemicals**

– allows substrate to breathe

– fast drying

– water repellent

– easy to clean

– self cleaning properties

– microbial growth retarding

– no change in substrate colour *

– no change in Wet traction readings

– UV resistant

* when following application procedure

** extra coats will improve these properties, If the impregnated substrate is damaged or worn away, loss of repellent properties will occur

Application on:

– concrete

– brick / clinker

– unglazed tiles

– sand limestone

– some natural stones such as granite and marble

– mineral plaster

– Non Oil based or Acrylic Paints. (Only Water Based Paints)


Coverage: Coverage will depend on the porosity of tiles, temperature and method of application. Approximate coverage is as follows:

• Terracotta Tiles – 8-10 square meters per litre
• Slate – 8-10 square meters per litre
• Tessellated Tiles – 12-15 square meters per litre
• Limestone – 6-8 square meters per litre
• Granite – 8-10 square meters per litre
• Marble – 8-10 square meters per litre
• Sandstone – 6-8 square meters per litre
• Porcelain – 15-30 square meters per litre
• Concrete pavers – 8-10 square meters per litre


Product Characteristics:

Active Ingredients:  Proprietary Silane technology

Colour:  clear

Active ingredient :   8 – 10%

Touch dry:  2 – 60 mins

Density:  1.03

Odour:  none

Browse through our entire range of concrete densifier and sealers to place your order! We will be delighted to serve you with our bespoke products and chemical solutions. Connect us today!




Seen a Lower Price?

Call us on

1300 000 338

right away